At $ 269, BT is much more accessible to consumers that the father, level 10 If you're familiar with my past cases, review articles, you know I do not walk on the ground. I just sent some good pictures and share my thoughts.
The L10GT weighs 28 pounds. The length is 23 ", width is 11.1" and height is 23.2 "
282mm (width) x 584mm (H) x 590mm (depth)
The top window is an odd sight in the chassis. 10GT level is very well done.
The liner does not turn red as the initial level of 10.
Near the surface textured plastic bezel 10 GT level and upper deck.
I really like the layout of the 2 x USB 3.0, USB 2.0 x 4, 1 x eSATA, HD Audio x 1
Two USB 3.0 ports (blue) and an eSATA port on top. The up and down buttons to control the speed 200mm fans included.
"Fan LED" button you can change the color red, blue, green, lighting a series of moods, and the flashing in place, three 200 mm fans
The case feet are re-treatable, and discovered.
You can install a 140mm or 120mm fan cooling the exhaust. Note that there are three holes for water cooling tubes.
Note the "T" brand on the panel access.
The top handle works really well, in short it is awesome. The plastic bezel and top panel helps cut down the carry weight.
RED trim does not come on the GT version, the mod!
5.25 optical drive covers are made of plastic and are removable clip and release that you have to pinch inward.
Optical bay covers are filtered. Jersey perforated steel.
The top panel is easily removed by pressing a release button on the back.
You can mount two 120mm fans and a 240mm radiator in the top panel. (200m above the fan must be removed.)
You can install two 120mm fans and the radiator 240 millimeters in the top bar. (Top 200 rThere fan has five hot-swappable hard drive bays, each of which is dedicated to the support of the new "hot-swappable." HDD installation supports both 2.5 "or 3.5" drives.emoved.)
Hot-swap are protected by locks. The keys are included.
What surprised me is that you need to pay a 3.5 "and 2.5" hard drive screws. I expect that 100% of the $ 269 chassis
Peeking in the hot-swap Bay to reveal the circuit. The bay is suitable for both 2.5 "and 3.5" disk format.
The filter side mounted 200mm fan is easily accessible. Fan 200 x 200 x 30 mm 600 to 800 rpm, 13 - 15 dB of noise and speed of the value accordingly.
The access panel is secured with a lock.
Once access is blocked, you must press a release button at the bottom of the chassis.
Side panel hinged for easy opening side door and computer access for maintenance or upgrades.
Hinged side panel allows easy opening door and side access to a computer maintThermaltake was smart enough to be the first to take the takeover of port access and the substrate to remove wire mess for the panel to install or update fans . enance.
The hinges are very sturdy.
The interior is not as hollow as I expected. It reminded me of a dragon Chieftec. There is Micro ATX, ATX, EATX. I also bet that the level 10 is the same production unit. CPU coolers will fit the GT measuring up to 190 mm in height and graphics cards measuring up to 360 mm in length.
There is a space "between the back of the motherboard and secondary schools. Grommets management wire size similar to the 800D Corsair, but less quantity. I want to see part of the L-10 is lying in a future version of additional space.
Fan cables are factory set in sleeves black.
I really like the design of the fan blades of the cooling fan on the back. It measures 140 x 140 x 25 mm and 16 1000PRM dBA.
The top panel mounted 200 x 200 x 30 mm color motion Fan High is classified the same as the fan mounted on the side of 600 - 800rpm, 13 to 15 dB.
There are eight PCI slots. Note that you can not access the screws inside the chassis
The side-mounted 200mm fan features blades adjustable to help direct air. (600 - 800rpm, 13 to 15 dB)
The bottom is a removable filter screen power.
Merits of the case fits 120 x 120 x 25mm intake fan, which is voluntary.
An overview of hot-swap bay taken.
Just out of curiosity, I removed the cover on the left side of the optical drive bays. Does not serve any purpose of performance.
Side cover removed.
The front I / S port circuit boards are of good quality. No worries about the poor welding or "stuck on" switches.
The front panel comes off easily, use and clean the filters inside.
The entire front plastic is filtered. The perforated mesh is made of steel.
Front of the fan measures 200 x 200 x 20 mm 600 to 800 rpm and 13-15 dBA.
The bottom of the cabinet. The case feet are re-treatable.
What do you use the third hole for water cooling? Hmmm.
Accessories include all necessary screws black straps, the installation of a piece of the headset. This is available for $ 269.99 NewEgg L10GT. This mod will go under the knife right away, so I have not had time for installation and testing facilities. I'm sure that those who can afford to buy the GT for use in air-cooled system is happy.
Raves!
Well-designed building.
Ideal for air cooling systems.
Good for quiet computing.
Good cable management.
Ready!
Long low chassis and wider.
Add Tool-less 2.5 "and 3.5".
They USB3.0 motherboard instead of connecting links in the back of the motherboard.
Posted in: Review
